Europump International
LPG Pumps and Spare Parts
Products for the delivery of Liquefied Petroleum Gas.
Pumps and compressors for LPG systems
Europump distributes some of the world's best-known brands of LPG pumps and compressors.
Furthermore, some models are produced internally for those looking for the best quality/price ratio.
The Europump LPG Pump & Spare Range
Europump offers a wide range of LPG dispenser pump options that ensure flexibility for every filling station.
SIHI side channel LPG pumps
Main features and technical data
- Low NPSH required
- No vapor lock
- Self-priming after initial fill
- Low flow – Medium to high heads
- Low speed – Long life
- Floating impellers
- Low wear
- Minimal axial thrust
- Vacuum lift over 25 ft
- Wide selection of shaft seal arrangements
- Compact and quiet
- Heads: up to 1000 ft (305 m)
- Temperature: up to 350°F (180°C)
- Pressure: up to 580 PSIG (40 bar)
- Speed: up to 1750 rpm
EP50 Side Channel LPG Pumps
Europump EP-50 side-channel LPG pumps are cost-effective, high-performance pumps designed specifically for LPG filling stations and underground tank applications. Models with 6 or 8 side channels are available. They are the ideal solution for pumping liquids with high differential pressure, low NPSH conditions, and aerated liquids up to 50% gas from underground tanks.
RT150 Turbine LPG Pump
The RT150 regenerative turbine pump was specifically designed by Europump Italia for high differential pressure applications using LPG and other liquefied gases.
Main features
Technical specificationsBelow are some applications where you can use the RT150:
- Car gas distribution
- Cylinder filling
- Vaporizer feeding
- Aerosol propellant
- Direct burner feeding
- Block transfer
The RT150 is also a truly cost-effective alternative to submersible and side channel pumping systems. It is ATEX certified and fully compliant with European standards.
Bypass valve
ProLPG bypass valves are designed to protect pumps and hydraulic system components from excessive pressure damage by regulating the system's differential pressure. The bypass valve increases pumping performance and improves the life of the pump and its mechanical seal, extending its overall life.
Main features
CV100 bypass valve
- Suitable for turbine pumps such as RT150, FD150, …
- Inlet: 1″
- Outlet: 1″
- Liquids: LPG and NH3
- Integrated custom vapor removal system.
- Differential valve: 25–225 psi (1.7–15.5 bar)
- Design pressure: 25 bar
- Flange connection (optional)
BV100 bypass valve
- Suitable for side channel pumps such as SIHI, EP50, Travaini
- Inlet: 1″
- Outlet: 1″
- Liquids: LPG and NH3
- Optional integrated vapor removal system.
- Differential valve: 25–225 psi (1.7–15.5 bar)
- Design pressure: 25 bar
- Flange connection (optional)
Blackmer LGL Sliding Vane Pump
EPV sliding vane pump
EPV sliding vane pumps are designed to meet the pumping requirements typical of large volume transfer operations.
Main features
- Available sizes from 2″ to 3″.
- High capacity at lower speeds.
- Internal safety valve.
- Self-priming function.
- Flow rate: 65 m3/h max.
- Differential pressure: 8.5 bar
- Temperature range: -30°C to 150°C
OEM mechanical seal for LPG pumps
Europump produces OEM mechanical seals for LPG pumps, including the most common brands on the market.
Main features
Main features:
- p = 25 bar
- t = -20 … 180 °C
- v = 15 m/s
Materials:
- carbon-graphite
- Cr – steel
- Cr – Ni steel
- Cr – Ni hard-coated
- tungsten carbide
- silicon carbide
- alumina (Al O)
OEM Sliding Vane Pump Vanes
Europump produces OEM vanes for mobile/stationary, sliding vane and transfer pumps.
Main features
- High quality
- Durable
- Different models for different sizes of sliding vane pumps.
- Convenient
Explosion-proof induction motors
The explosion-proof motors of the II 2G EExe II series are explosion-proof, increased safety, fully enclosed IP 55 three-phase asynchronous motors. They are suitable for operation in hazardous areas, other than mining, due to the presence of explosive gases, vapours or mists (Group II).
Destination areas
The motors belong to Group II devices, Category 2G, intended for operation in Zone 1 and Zone 2.
Zone 1 covers areas where an explosive atmosphere occurs occasionally (not constantly).
Zone 2 covers areas where the occurrence of an explosive atmosphere is not likely, but if it does occur, then only rarely and only for a short time.
Features of the explosion-proof motor
Technical data sheet- rated power for continuous duty,
- rated voltage 230, 400, 500 [V],
- frequency 50 [Hz],
- ambient temperature from -20 to 40 [°C],
- altitude up to 1000 [m] above sea level,
- insulation class F,
- degree of protection IP 55,
- one free shaft extension according to the size
- drawing (two shaft extensions on request),
- terminal box with cable glands and terminal block with 6 terminals,
- there is the possibility of offering motors of mechanical sizes 90 and 112 with terminal box mounted on the left or right side of the motor frame
Europump International is the partner you can trust!
A team of experienced professionals to find the ideal solution for every need.
